Table of Contents
Advertisement
9-10
• The Two/Four-Wire Autovon Adapter with cable adapts a two·
wire telephone to a four-wire AUTOVON network through an
AUTOVON line interface unit (ALIU).
• The RJ11C-to-RJ45S Adapter is the hardware interface that
converts a 8-position RJ45S jack (two pins are used to mount a
resistor to set the gain level to optimize modem performance) to
a 6-position RJ 11 C jack. It requires a six conductor telephone
line cord.
• The RJllC Terminal Block with cover is a six-conductor screw
terminal box for an RJ 11 C jack (for foreign use).
• The Data Port HEMP Adapter provides high-altitude
electromagnetic pulse (HEMP) protection for the RS449 data
port.
• The Handset HEMP Adapter provides high-altitude
electromagnetic pulse protection for the handset port.
• The Terminal Carrying Case provides protection for the
STU 111/SECTEL and accessories while in transit or storage.
Includes universal power and telephone adapters.
• The RJllC-to-50-pin Adapter is the hardware interface between
the terminal's RJ 11 C jack and the 50-pin connector used in a
Bell 1 A2 system.
• The 50-pin-to-RJllC Adapter is the hardware interface between
the STU 111/SECTEL's 50-pin connector (multiline model) and a
standard single line system.
Advertisement
Table of Contents
