Table of Contents
Advertisement
@
Plug the other end of the coiled cord into the left side of the
terminal as shown (Figure 3-4). The proper connection is
made when the the connector snaps into place.
@
Plug one end of the 15-foot telephone line cord into the jack
at the rear of the STU 111/SECTEL terminal (Figure 3·5). The
proper connection is made when the connector snaps into
place.
·/
87-1727
Figure 3·5
Telephone Line Cord Connection
@
Plug the other end of the line cord into the modular jack in
the wall. The proper connection is made when the connector
snaps into place.
®
Plug the 8-pin DIN power connector into the DIN jack at the
rear of the terminal (Figure 3-6). Match the notch on the DIN
power converter to the notch on the DIN jack.
3-5
Advertisement
Table of Contents
