Table of Contents
Advertisement
2-16 Installing the cabinet
Procedure 2-3 (continued)
Preparing the cabinet for installation
Crane operation precautions
Adhere to all local, state, and federal safety standards for crane operations.
Ensure the following guidelines are observed:
•
•
•
•
•
•
Eyebolt precautions
Before lifting cabinet, ensure that eyebolts are free of the following visible
defects:
•
•
•
•
Cabinet weights
Table 2-6 lists the weight of the S800A cabinets equipped with each of the two
optional roof assemblies.
Table 2-6
Cabinet weights
Cabinet (without batteries)
Equipped with air induction roof
Equipped with heat exchanger roof
AccessNode 323-3001-210 Issue 1.0
Set up the crane on firm footing.
Extend the outriggers, block the floaters and insert safety pins.
Ensure that the crane is "off rubber" during the lift.
Ensure that the crane is level before lifting to eliminate tipping.
Do not place any body part underneath the load at any time and do not
stand on the load.
Use tag lines to maneuver the load.
bent or distorted eye or shank
obvious wear
worn and/or distorted threads
cracks
Weight
2000 lb (907.2 kg)
2200 lb (997.9 kg)
—continued—
Advertisement
Table of Contents
