Installing The Passport 8683Pos Module; Safety And Environmental Precautions - Nortel Passport 8683POS Using Manual

Chapter 3

Installing the Passport 8683POS Module

This chapter describes the procedure for installing the Passport 8683POS Module.
It covers the following topics:
•
•
•
•
•
•
For more information about the Passport 8600 chassis, refer to the following
documents:
•
•
•

Safety and environmental precautions

Before you begin performing any installation or replacement procedure on the
Passport switch, please note the following safe handling guidelines:
•
"Safety and environmental precautions,"
"Installing the Passport 8683POS Module" on page 37
"Verifying installation" on page 40
"Initialization" on page 40
"MDA insertion and configuration" on page 42
"Replacing a module" on page 43
Getting Started with Passport 8000 Series Management Software
Using the Passport 8600 Modules
Installing the Passport 8600 Modules
To prevent damage caused by electrostatic discharge (ESD), handle the switch
chassis and modules only when you, the chassis, and the chassis modules are
properly grounded. Nortel Networks recommends the use of a grounding
wrist strap.
next
Using the Passport 8683POS Module
35