Setup Via Device Configuration Interface - Crestron TSS-470E Product Manual

Setup via Device Configuration Interface

Use the following procedures to set up an individual TSS-470E using its configuration interfaces.
Access a Configuration Interface
Device settings can be configured using the touch screen's web configuration interface. Additionally, a
subset of device settings can be configured using the touch screen's local setup screens.
Access the Web Configuration Interface
To access the web configuration interface using the touch screen IP address:
NOTE: The touch screen ships with DHCP turned on. A DHCP server is required to access the web
configuration interface via the touch screen IP address. A static IP address can be configured for the
touch screen as described in
1. Connect the touch screen to the Ethernet network.
2. Locate the touch screen IP address. The IP address is shown on the splash screen that is displayed
after booting the touch screen for the first time. Additionally, the Device Discovery tool in
Crestron Toolbox™ software
NOTE: Crestron Toolbox software can only be used to discover the touch screen IP address on
the network. The touch screen does not support device configuration or any other related
functions via Crestron Toolbox.
3. Enter the touch screen IP address into a web browser.
4. If connecting to the touch screen for the first time, create an admin account as described in
Create an Admin Account on page
5. Enter the admin account login credentials when prompted, then select Sign In.
54 • TSS-470E
Set Up a Network Connection on page
can be used to discover the touch screen IP address.
56.
57.
Product Manual — Doc. 9347A