Crestron TSS-470E Product Manual page 103

Configure a Wi-Fi Access Point
On the Wi-Fi Setup screen, tap Select SSID. The Select SSID screen is displayed.
Use the Select SSID screen to connect the touch screen to an existing WAP that is in range or to
configure a new WAP. Any WAPs that are in range and discoverable are displayed within this screen
upon successful discovery. Select Refresh to refresh the listed of discovered WAPs.
NOTES:
Not all nearby WAPs may be discovered during a scan. If a desired WAP is still not discovered
l
after multiple scans, it must be added manually using the +Add SSID function.
Only one WAP can be configured for the touch screen using the local configuration screens,
l
while up to four WAPs can be configured using the web configuration interface. Attempting
to configure a WAP using the local configuration screens will delete any additional WAPs that
were previously added using the web configuration interface.
Product Manual — Doc. 9347A TSS-470E • 99