Crestron TSS-470E Product Manual page 82

The following Network settings are provided:
NOTE: The Domain, IP Address, Subnet Mask, and Default Gateway fields are required only if DHCP
is turned off for Ethernet or Wi-Fi network connections.
Network Configuration
l
Hostname: Enter the touch screen host name.
o
Primary Static DNS: Enter the primary DNS address used to resolve the touch screen
o
domain to an IP address.
Secondary Static DNS: Enter the secondary DNS address used to resolve the touch screen
o
domain to an IP address.
Ethernet
l
Adapter Enabled: Turn on the toggle to use the touch screen Ethernet adapter, which
o
allows the touch screen to make an Ethernet connection.
DHCP: Turn on the toggle to use DHCP for the Ethernet connection.
o
NOTE: If DHCP is turned on, IP does not function until a reply has been received from
the server. The touch screen broadcasts requests for an IP address periodically.
Domain: Enter the fully qualified domain name for the Ethernet connection.
o
IP Address: Enter a static touch screen IP address for the Ethernet connection.
o
Subnet Mask: Enter a touch screen subnet mask address for the Ethernet connection.
o
Default Gateway: Enter the gateway router address on the network.
o
Wi-Fi
l
Adapter Enabled: Turn on the toggle to use the touch screen Wi-Fi adapter, which allows
o
the touch screen to make a Wi-Fi network connection.
DHCP: Turn on the toggle to use DHCP for the Wi-Fi network connection.
o
NOTE: If DHCP is turned on, IP does not function until a reply has been received from
the server. The touch screen broadcasts requests for an IP address periodically.
Domain: Enter the fully qualified domain name for the Wi-Fi network connection.
o
IP Address: Enter a static touch screen IP address for the Wi-Fi network connection.
o
Subnet Mask: Enter a touch screen subnet mask address for the Wi-Fi network connection.
o
Default Gateway: Enter the gateway router address on the network.
o
Wi-Fi Access Points
l
NOTE: The Ethernet adapter must be turned off before a Wi-Fi connection can be
established.
Scan Wi-Fi Access Points: Scans the network for open Wi-Fi access points (WAPs) that are
o
in range of the touch screen. All discovered access points are displayed in the Select
Discovered Access Points menu.
78 • TSS-470E Product Manual — Doc. 9347A