TSS-470E-MSMK Installation
Use the following procedures to install the TSS-470E-MSMK.
In the Box
Qty.
Description
1
TSS-470E-MSMK-B-T, Multisurface Mount Kit for TSS-470E
Additional Items
1
Template, Rear Housing (4535585)
1
Grommet, Rubber (2061467)
1
Screw, 4-40 x 3/16 in., Torx®, Black (2061048)
1
Screw, 4-40 x 3/16 in., Phillips, Black (2007148)
1
Label, Black (4535584)
Install the MSMK
Use the following procedures to install the MSMK onto a flat pane of glass or similar smooth surface
(such as granite, marble, plaster, or smooth stone and masonry). The adhesive on the MSMK mounting
bracket attaches permanently to the surface.
The following materials (not included) are required for this installation:
Level
l
Masking tape
l
Phillips screwdriver
l
Surface cleaning product that does not leave a film
l
Position the Rear Housing Template
An overlay template for the rear housing is provided with the MSMK to help ensure that it remains level
during installation.
To position the rear housing template:
1. Clean and dry the mounting surface thoroughly.
2. Select a mounting location for the MSMK, and determine whether raceway (not included) will
enter the MSMK from the top, bottom, left, or right cutout.
Product Manual — Doc. 9347A
TSS-470E • 25