Crestron TSS-470E Product Manual page 83

NOTE: Not all nearby WAPs may be discovered during a scan. If a desired WAP is still
not discovered after multiple scans, it must be added manually using the WAP table
below this setting.
Select Discovered Access Points: Select an access point after completing a scan. Enter text
o
in the search field to search for a specific WAP name.
Add Access Points: Adds the chosen access point entry from the Select Discovered Access
o
Points field to the table below.
Each added WAP is displayed in a table that contains the following information:
NOTE: The SSID and Encryption Key fields are populated automatically when a
discovered WAP is selected. This information must be entered manually when adding a
new WAP.
SSID: Enter or modify the SSID (name) of the WAP.
n
Encryption Key: Select the security/encryption type used by the WAP.
n
Password: Enter the password used to connect to the WAP.
n
Active Access Point: Indicates whether a connection to the WAP.
n
Select Add to add a new entry to the WAP table. After selecting one more entries in the
WAP table, select Remove to delete the selected entries.
NOTE: No more than four WAPs can be assigned to the touch screen at once. An
existing WAP must be removed before a new one can be added.
Device Display
The Device Display subsection is used to configure device display settings for the touch screen.
Enter a value (1‒100%) for the LCD display brightness in the Brightness text field.
Product Manual — Doc. 9347A TSS-470E • 79