Table of Contents
Advertisement
4. (Optional) Screw either the included 4-40 x 3/16 in. Phillips screw or the Torx® security screw into
the bottom of the touch screen to secure it to the MSMK.
Attach the Rear Label (Optional)
To provide a finished appearance for installations on glass or other transparent surfaces, install the
included rear label on the opposite side of the surface behind the MSMK.
To attach the rear label:
1. Clean and dry the rear of the mounting surface thoroughly.
2. Using a level, tape a horizontal reference line on the glass surface that aligns with the lower edge
of the rear housing on the opposite side. Ensure the reference line is level before proceeding.
3. Remove the protective liner from the back of the label.
CAUTION: The adhesive on the back of the rear label is high-strength bond. Once the adhesive
comes in contact with a surface, it cannot be removed easily.
32 • TSS-470E
Product Manual — Doc. 9347A
Advertisement
Table of Contents
