Table of Contents
Advertisement
TSW-732:
7" Room Scheduling Touch Screen
Access the Setup Screens
The setup screens enable basic configuration prior to regular operation of the TSW-732
from Crestron
the unit.
NOTE:
screen defaults to the main setup screen.
During regular operation of the TSW-732, there are two ways to access the setup screens:
1. Place a button on the project main page and assign the reserved join number
2. Press hard keys 1, 2, 3, and 4 to the left of the touch screen display in sequence,
The TSW-732 Setup screen is displayed.
TSW-732 Setup Screen
The TSW-732 Setup screen is composed of buttons for Ethernet setup, IP table setup,
audio setup, display setup, standby timeout, and diagnostics. In addition, there are buttons
to toggle user project mode and system messages on or off. An About button provides
information about the touch screen, and a Save & Exit button saves settings and exits the
setup screens. The functions of each are detailed in the following pages of this guide.
Supplemental Guide – DOC. 7669A
®
. To display the main setup screen, touch the screen while applying power to
If no project has been loaded or if an invalid project has been loaded, the touch
(17242) that accesses the setup screens.
twice (press 1, 2, 3, 4, 1, 2, 3, 4) within a 5-second period.
TSW-732: 7˝ Room Scheduling Touch Screen • 1
Advertisement
Table of Contents
