Crestron TSS-470E Product Manual page 65

6. Add a wireless access point (WAP) to the touch screen:
a. Select Scan Wi-Fi Access Points in the Wi-Fi Access Points subsection to scan the network
for open WAPs. All discovered access points are displayed within the Select Discovered
Access Points menu.
b. Select a discovered WAP from the Select Discovered Access Points menu, and then select
Add Access Point. The WAP is added to the table below this setting with its SSID and
Encryption Key settings populated.
NOTE: A WAP can also be manually entered by selecting Add below the provided table.
For more information, refer to
c. Enter the password for the selected WAP in the Password text field within the appropriate
table row.
7. Select Save Changes from the Action menu to restart the touch screen. The touch screen
attempts to connect to the static IP address over the selected WAP after it restarts.
Update Firmware
The touch screen firmware should always be updated to the latest version. Firmware can be loaded to
the touch screen via the web configuration interface.
NOTE: Automatic firmware updates can also be configured for the touch screen. For more
information, refer to
To update the touch screen firmware:
1. Download the latest firmware PUF (package update file) from the
www.crestron.com/Support/Resource-Library.
2. Access the web configuration interface as described in
page 54.
3. Select Update Firmware from the Action drop-down menu on the top right of the page. The
Update Firmware dialog box is displayed.
4. Select Browse, and then navigate to the firmware PUF on the local computer.
5. Select the firmware PUF, and then select Open.
6. Select Upload to load the PUF to the touch screen. The upload progress is shown in the dialog box.
7. Once the touch screen has completed the firmware update, select OK to close the dialog box.
Product Manual — Doc. 9347A
Auto Update on page
Network on page 77.
81.
Access the Web Configuration Interface on
TSS-470E product page
TSS-470E • 61
or