8. After confirming that the rear housing is level, press it to the mounting surface firmly to ensure
proper adhesion and to eliminate any trapped air bubbles.
NOTE: The adhesive wet area (the total area of the adhesive that is free of air bubbles or
debris) must be 60% or greater.
NOTE: Allow a minimum of one hour for the adhesive to cure to the bracket before installing
the touch screen.
Attach the Touch Screen
To attach the touch screen to the MSMK:
1. Cut the rear housing template off of the surface and remove any existing tape guides.
2. Connect all cables to the rear of the touch screen.
30 • TSS-470E
Product Manual — Doc. 9347A