Crestron TSS-470E Product Manual page 32

6. Position the raceway on the mounting surface using the corresponding raceway cutout and
reference lines in the template. Ensure the raceway is level prior to adhesion.
7. Press the raceway against the mounting surface firmly until it adheres completely.
8. Attach any elbows, couplings, and additional cable channels to the mounting surface as
necessary.
Attach the Rear Housing
To attach the MSMK rear housing to the mounting surface:
1. Remove the plastic trim ring from the MSMK rear housing. The MSMK ships with the trim ring
loosely attached to the rear housing.
28 • TSS-470E Product Manual — Doc. 9347A