Setup; Configuring The Touch Screen - Crestron DualTouch DTT-15V3 Operation Manual

Crestron DTT-15V3

Setup

Operations Guide – DOC. 6632C
DualTouch

Configuring the Touch Screen

NOTE: The only connection required to configure the touch screen is power. Refer
to "Hardware Hookup" which starts on page 16 for details.
The touch screen display can be configured using the four setup buttons on the top of
the DTT-15V3. Power is required to configure the touch screen. Refer to "Hardware
Hookup" which starts on page 16 for information on connecting power.
Onscreen Setup Buttons
MENU -
The MENU button provides access to the following 11 adjustment menus. Use the
Selection (-)/(+) buttons to select a menu or to move forward or backward through
the 11 menus. Press the ENTER button to open and save the selected menu.
1. Contrast – Use the selection (-)/(+) buttons to decrease or increase contrast,
press the ENTER button to save.
Contrast Control
2. Brightness – Use the (-)/(+) buttons to decrease or increase brightness, press
the ENTER button to save.
Brightness Control
®
Technology Touch Screen
+ ENTER
®
Technology Touch Screen: DTT-15V3 • 9
DualTouch