Access The Setup Screens - Crestron TSS-770 Product Manual

Access the Setup Screens

The setup screens enable basic configuration prior to regular operation of the touch screen.
To access the touch screen's built-in setup screens during regular operation, place five fingers on
the display and hold for 15 seconds.
The main Setup screen is displayed (TSS-770 shown).
TSS-770 Setup Screen
NOTE: The touch screen also provides a web configuration interface that may be used to view
and configure various touch screen settings. For more information, refer to
(on page 23).
The Setup screen shows the IP address and hostname of the touch screen and provides the
following configuration selections:
Buttons for Ethernet setup, application selection, Wi-Fi® network setup, diagnostics,
l
Bluetooth® beacon configuration, and the virtual toolbar.
An About button that provides information about the touch screen.
l
The functions of each button are detailed in the following pages of this guide.
NOTE: A toolbar is present on the bottom of all setup screens. The toolbar provides a gear
button that may be tapped to return to the Setup screen and a Save & Exit button that
may be tapped to save all settings, to exit the setup screens, and to return to the selected
scheduling application.
2 • TSS-770 and TSS-1070
Web Configuration
Product Manual — Doc. 8745C