Configuration Via Web Interface - Crestron TSW-560 Supplemental Manual

Configuration via Web Interface

The touch screen can also be monitored and configured using the included web
configuration interface. The configuration interface is accessible from a web browser if the
IP address of the touch screen is known.
To access the configuration interface, perform the following procedure:
Touch Screen Configuration Interface
NOTE:
TSW-1060, the touch screen configuration utility provides additional configuration options
for room scheduling. For more information on configuring the scheduling application, refer to
"Configuration via Web Interface" in the Crestron Room Scheduling Panels Operations
Guide (Doc. 8205) at www.crestron.com/manuals.
The configuration interface provides a Status tab for monitoring touch screen settings and a
Settings tab for configuring touch screen settings. The device hostname is displayed at the
top left of the page.
The Status tab is the default tab that displays, as shown in the image above.
Supplemental Guide – DOC. 7927F
Open a web browser.
Enter the touch screen's IP address into the browser URL field. The touch screen
configuration interface loads.
NOTE: If authentication is enabled for the touch screen, an administrator username
and password must be entered prior to accessing the web configuration interface.
For more information on configuring authentication settings for the touch screen,
refer to "Authentication Management," starting on page 31.
If the native scheduling application has been enabled on the TSW-760 or
TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens • 19