Crestron TSS-470E Product Manual page 105

5. Tap the appropriate encryption type used by the WAP to populate the setting in the Confirmation
Info screen.
6. Tap the Password text field to display an on-screen keyboard.
7. Enter the password used to connect to the WAP.
8. Tap OK.
The touch screen attempts to connect to the WAP using the provided credentials. If a connection is
established, the Wi-Fi Setup page updates to show a Connected status and information about the
Wi-Fi connection.
Configure IP Settings
Tap IP Settings to display the IP Settings screen.
Use the IP Settings screen to configure DHCP and to set a static IP address if DHCP is turned off.
NOTE: DHCP is turned on by default for the Wi-Fi network connection.
Turn on the Use DHCP toggle to turn on DHCP for the Wi-Fi network connection.
l
If Use DHCP is turned off, static IP addresses can be entered manually. Tap the text fields under
l
IP Address, Subnet Mask, Gateway, Primary DNS, or Secondary DNS to display an on-screen
keyboard for editing the respective setting.
After any changes have been made, select OK to apply the new settings and restart the touch screen (if
required). Select Cancel to cancel the changes.
Select the back arrow button to return to the Wi-Fi Setup screen.
Product Manual — Doc. 9347A TSS-470E • 101