Yamaha XSR 900 2022 Service Manual page 75

1. Frame
2. Fuel tank breather hose (fuel tank to canister)
3. Canister
4. Canister purge hose (purge cut valve sole-
noid to canister)
5. Canister breather hose
6. Fuel tank drain hose
7. Canister purge hose (purge cut valve sole-
noid to hose joint)
8. Purge cut valve solenoid
A. Face the white paint mark on the fuel tank
breather hose (fuel tank to canister) upward.
B. Install the clip with its end facing the down.
C. Face the yellow paint mark on the canister
purge hose (purge cut valve solenoid to can-
ister) upward.
D. Insert each hose until it stops each part.
E. Install the clip with its end facing the top.
F. Face the blue paint mark on the canister
purge hose (purge cut valve solenoid to can-
ister) upward.
G. Install the clip with its end facing the rear.
H. Fit the fuel tank drain hose into the canister
holder as shown in the illustration.
2-46
CABLE ROUTING