Adjusting The Shift Pedal - Yamaha XSR 900 2022 Service Manual

EAS31729

ADJUSTING THE SHIFT PEDAL

TIP
The shift pedal position is determined by the in-
stalled shift rod length.
1. Measure:
• Installed shift rod length "a"
Incorrect → Adjust.
Installed shift rod length
236.0–238.0 mm (9.29–9.37 in)
2. Adjust:
• Installed shift rod length
a. Loosen both locknuts "1".
b. Turn the shift rod "2" until the specified in-
stalled shift rod length is obtained.
2
c. Tighten both locknuts.
TIP
Be sure to place the shift rod joints in parallel.
The allowable twist of the shift rod joints is ±5°.
Shift rod locknut
7 N·m (0.7 kgf·m, 5.2 lb·ft)
d. Make sure the installed shift rod length is
within specification.
a
1
1
4-93
CHAIN DRIVE