Yamaha XSR 900 2022 Service Manual page 65

1. Brake hose (front brake master cylinder to
hydraulic unit)
2. Brake hose (hydraulic unit to front brake cali-
per (left))
3. Front wheel sensor lead
4. Brake hose (front brake caliper (left) to front
brake caliper (right))
5. Front brake caliper assembly (left)
6. Reflector bracket
7. Front fork
8. Clamp
A. Make the front wheel sensor lead to follow
the brake hose (brake hose joint to front
brake caliper (left)) without slacking.
B. Install the brake hose (front brake caliper
(left) to front brake caliper (right)) with its
white paint mark facing outward.
C. Install the holder with contacted the front fork
leg.
D. Route the front wheel sensor lead on the
front side of the brake hose, and clamp the
white tape portion. The opening of the clamp
should face the front. Make sure the clamp is
engaged by 3 or more notches.
E. 45°
F. Left side of the vehicle
G. Front side of the vehicle
H. Insert the grommet of the front wheel sensor
lead.
I. Route the front wheel sensor lead on the
front side of the brake hose, and clamp the
white tape portion. Fasten the protector of the
brake hose with the clamp. The opening of
the clamp should face the front. Make sure
the clamp is engaged by 3 or more notches.
J. Fasten the white tape portion of the front
wheel sensor lead with the clamp.
2-36
CABLE ROUTING