Yamaha XSR 900 2022 Service Manual page 589

When the transmission is in neutral
When the transmission is in gear with the clutch lever released
Is it correct indication?
YES
→ Go to step 20.
NO
→ Go to step 12.
12.Faulty shift drum (neutral detection area).
• Check the shift drum.
Refer to "CHECKING THE SHIFT DRUM ASSEMBLY" on page 5-93.
Is check result OK?
YES
→ Go to step 13.
NO
→ Replace the shift drum and go to step 20.
Refer to "TRANSMISSION" on page 5-87.
13.Malfunction in ECU.
• Replace the ECU, and complete the service.
Refer to "REPLACING THE ECU (Engine Control Unit)" on page 8-41.
14.Clutch lever adjustment.
• Refer to "ADJUSTING THE CLUTCH LEVER FREE PLAY" on page 3-12.
• Execute the diagnostic mode. (Code 21)
When the clutch lever is released with the transmission in gear and when
the sidestand is retracted
When the clutch lever is squeezed with the transmission in gear and when
the sidestand is retracted
Is it correct indication?
YES
→ Go to step 20.
NO
→ Go to step 15.
15.Connection of clutch switch coupler.
• Check the locking condition of the coupler.
• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of the
pins).
Is the coupler condition normal?
YES
→ Go to step 16.
NO
a. Connect the coupler securely or replace the wire harness.
b. Execute the diagnostic mode. (Code 21)
9-183
P0500, P1500
ON
OFF
OFF
ON