Yamaha XSR 900 2022 Service Manual page 63

1. Brake hose (hydraulic unit to front brake cali-
per (left))
2. Brake hose (front brake master cylinder to
hydraulic unit)
3. Front fork
4. Front brake caliper assembly (right)
5. Clamp
6. Front fender
7. Bracket
8. Frame
9. Brake hose joint
10. Front wheel sensor lead
11. Brake hose (front brake caliper (left) to front
brake caliper (right))
A. After holding the protrusion (17 mm (0.67 in)
on the brake hose joint with an appropriate
tool, tighten the brake hose union bolts to the
specified torque.
B. Fit the metal fitting for the front brake hose to
the recess of the brake hose joint.
C. Install the brake hose between the stoppers
on the brake hose joint.
D. Insert the grommet of the front wheel sensor
lead.
E. Make sure the clamp is engaged by 2 or
more notches. Engage the claws so that they
face toward the rear of the vehicle.
F. Insert the clamp into the hole of the front
fender.
G. Fit the clamp between the ribs on the front
fender.
2-34
CABLE ROUTING