Acx6160 Front Panel - Juniper ACX6160 Hardware Manual

ACX6160 Management and Console Port LEDs on the Front Panel | 10
ACX6160 Network Port LEDs | 12

ACX6160 Front Panel

IN THIS SECTION
QSFP28 Network Ports | 8
CFP2-DCO Network Ports | 8
The front panel of the ACX6160 contains network ports, port LEDs, console and management ports, and
system status LEDs. You can manage the ACX6160 by using an open ROADM controller.
page 7 shows the ACX6160 port panel. There are eight QSFP28 network ports and four line CFP2
ports on the front panel. Only four of the eight QSFP28 ports are currently supported (only the even
ports of QSFP28, ports 0/0, 0/2, 0/4, 0/6 are supported). The system status LEDs that alert you to
minor or major alarms or other issues with the transponder.
Figure 3: ACX6160 Front Panel
1 Status LEDs—Alarm (ALM), system (SYS),
—
identification (ID).
Client ports (QSFP28 ports)
2
—
4 Line ports (CFP2 ports)
—
RJ-45 console port labelled (CON)
5
—
7
Figure 3 on