Juniper ACX6160 Hardware Manual page 96

• Disconnect the power cords.
• Ensure that you have disconnected any cables or wires attached to the ACX6160 (see
ACX6160 Transceivers and Fiber-Optic Cables" on page
To remove an ACX6160 from a rack:
1. Have one person support the weight of the ACX6160 while another person uses the screwdriver to
remove the front-mounting screws that attach the mounting rails to the rack.
2. Use the screwdriver to remove the mounting screws that attach the mounting blades attached to the
rear of the rack. Slide out the mounting rail.
3. Remove the ACX6160 from the rack.
4. Place the removed screws and rear-mounting blades in a labeled bag. You will need them when you
reinstall the chassis.
5. Transport the ACX6160 to your desired new location.
RELATED DOCUMENTATION
Mounting the ACX6160 | 49
74).
88
"Maintaining