Packing An Acx6160 For Shipping - Juniper ACX6160 Hardware Manual

Before you pack an ACX6160 or component:
• Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD)
damage. See "Prevention of Electrostatic Discharge Damage" on page
• Retrieve the original shipping carton and packing materials. Contact your JTAC representative, if you
do not have these materials, to learn about approved packing materials.
Ensure that you have the following parts and tools available:
• ESD grounding strap.
• Antistatic bag, one for each component.
• If you are returning the chassis, an appropriate screwdriver for the mounting screws used on your
rack or cabinet.

Packing an ACX6160 for Shipping

To pack an ACX6160 for shipping:
1. Power off the ACX6160 and remove the AC power cords or DC power cables. See
the ACX6160" on page
2. Remove the cables that connect the ACX6160 to all external devices. See
Optic Cable from the ACX6160" on page
3. Remove all field-replaceable units (FRUs) from the router. See:
• Figure 27 on page 69
• Figure 29 on page 72
4. Remove the ACX6160 from the rack or cabinet. See
5. Place the ACX6160 in an antistatic bag.
6. Place the ACX6160 in the shipping carton.
7. Place the packing foam on top of and around the ACX6160.
8. If you are returning accessories or FRUs with the ACX6160, pack them as instructed
ACX6160 Components for Shipping" on page 100
9. Close the top of the cardboard shipping box and seal it with packing tape.
10. Write the Return Materials Authorization (RMA) number on the exterior of the box to ensure
proper tracking.
66.
81.
128.
"Disconnecting a Fiber-
"Uninstalling the ACX6160" on page
.
"Powering Off
87.
in"Packing
99