Table of Contents
Advertisement
4. If you want to return or replace the NVIDIA GPU board to NVIDIA, remove the Dell provided protective cover from the GPU
board connectors and replace with the NVIDIA provided protective cover.
Next steps
Replace the GPU board for NVIDIA
Installing the GPU board for NVIDIA configurations
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Disconnect the cables from the connector on the system board and the storage tray.
4.
Remove the VSB from the system board
5.
Remove the storage
tray.
6.
Remove the risers
and keep the risers away from the system board tray and no need to disconnect the cables from the PSB.
7. Disconnect all the cables from the system board and make note of all the cable connections. For more information, see
Cabling
diagram.
8.
Remove the lower brace
9. Disconnect the liquid cooling tubes 11 and 12 from the Manifold for DLC module and keep in on the system board and make
sure do not damage any connectors on the system board.
10.
Slide out the system board
11. Unplug the GPU cold plate tubes from the Manifold liquid cooling module.
12.
Remove the sensor
tray.
13.
Remove the GPU and GPU cold
NOTE:
If you want to replace the whole GPU board, remove the GPU cold plate module along with the GPUs.
Steps
1. Here is the orientation image for removal and installation sequence of liquid cooling tubes for processor, PSB cold plate, GPU
cold plates.
Figure 261. removal and installation sequence of liquid cooling tubes for processor, PSB cold plate, GPU cold
plates
2. The NVIDIA GPU boards are shipped with NVIDIA protective covers. These covers should be removed and keep them safe.
These covers can be used while shipping the NVIDIA GPU board for replacement if there is any damage to GPU board. Insert
the Dell provided protective cover on to the GPU board.
238
Installing and removing system components
configurations.
Safety
instructions.
Before working inside your system
and keep it on the storage tray and no need to disconnect from the PDB2.
bracket.
tray.
plate.
.
Advertisement
Table of Contents
