Dell PowerEdge XE9640 Installation And Service Manual page 98

Figure 65. Installing the VSB assembly
4. For Intel GPU configurations, reconnect the VSB cables on the PDB of the bottom layer.
then install the storage tray
Figure 66. Cabling diagram
5. For NVIDIA GPU configurations, reconnect the VSB cables on the PDB of the bottom layer.
and then install the storage tray
system board.
6. Reconnect the signal cable on to the VSB.
Next steps
1. Install the riser 1A and 4A
2. Follow the procedure listed in
98 Installing and removing system components
into the chassis. Reconnect the VSB cables on the system board.
into the chassis. Reconnect the VSB cables on the PBD2 of the storage tray and on the
for Intel GPU configurations or
After working inside your
install the riser 1B and 4B
system.
Install the system board
Install the system board
for NVIDIA GPU configurations.
tray, and
tray,