Dell PowerEdge XE9640 Installation And Service Manual page 108

Figure 78. BOSS-N1, Right and Left Control panels, Intrusion switch cable connections from the Storage tray
connecting on the System board for NVIDIA GPU Configurations
NOTE: Make sure you route the VGA connector, BOSS module signal cable, BOSS module power connector on system
board via Processor 1 turtle shell.
NOTE: Make sure you route the Intrusion switch connector on system board via processor 2 turtle shell.
Order
1
2
3
4
5
6
7
8
108 Installing and removing system components
From
MB-BOSS_PWR (BOSS module power
connector on system board)
MB-SL16_PCH_PA9 (BOSS module
signal cable on system board)
RIO-INTRUSION_DET1 (Intrusion switch
connector on system board)
MB-LFT_CP (Left control panel
connector on system board)
MB-RGT_CP (Right control panel
connector on system board)
MB_FRONT_VIDEO (VGA connector on
system board)
MB_DSL1 (System board signal
connector)
RIO-J6 (CPU cool plates connector on
system board)
To
BOSS-BOSS_PWR (BOSS module
power connector)
BOSS-CTRL_DST_PA1 (BOSS module
signal connector)
Intrusion Switch
Left EAR (Left Control Panel)
Right EAR (Right Control Panel)
VGA port
MB_SL15 (System board signal
connector)
CPU Cool Plates