Table of Contents
Advertisement
Figure 135. Installing the TPM
Initializing TPM for users
Steps
1. Initialize the TPM.
For more information, see
2. The TPM Status changes to Enabled, Activated.
Initializing the TPM 2.0 for users
Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On.
4. Save the settings.
5. Restart your system.
Optional OCP card
Removing the OCP card
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the risers 1A and 4A
Steps
1. Open the blue latch to disengage the OCP card.
2. Push the OCP card toward the rear end of the system to disconnect from the connector on the system board.
3. Slide the OCP card out of the slot on the system.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
152
Installing and removing system components
Initializing the TPM 2.0 for
Safety
instructions.
Before working inside your
for Intel GPU configurations or
users.
system.
Remove the riser 1B and 4B
for NVIDIA GPU configurations.
Advertisement
Table of Contents
