Table of Contents
Advertisement
Figure 57. Installing the BOSS-N1 module
Figure 58. BOSS-N1 cable diagram
6. Align the M.2 SSD at an angle with the BOSS-N1 card carrier.
7. Insert the M.2 SSD until it is firmly seated in the BOSS-N1 card carrier.
8. Using the Phillips 1 screwdriver, secure the M.2 SSD on the BOSS-N1 card carrier with the M3 x 0.5 x 4.5 mm screw.
Installing and removing system components
93
Advertisement
Table of Contents
