Table of Contents
Advertisement
Figure 242. Installing the PSB
2. Align and insert the plastic cable holder on the PSB. Using the Phillips 2 screwdriver, tighten the screws securing the plastic
cable holder on the PSB.
Figure 243. Installing the cable holder
3. To lock the PSB to the GPU assembly on the chassis, follow the steps that are mentioned below:
a. Lift the GPU assembly handle to extend the clips.
b. Fit the clips into the holders.
c. Lower the GPU assembly handle to ensure the clips that are connected and the GPU assembly is secured.
226
Installing and removing system components
Advertisement
Table of Contents
