Dell PowerEdge XE9640 Installation And Service Manual page 11

Table 2. Rear view of the system (continued)
Item Ports, panels, or slots
6 PCIe expansion card riser 4
(slot 3)
7 Dedicated iDRAC9 Ethernet
port
8 USB 2.0 port
9 USB 3.0 port
10 PCIe expansion card riser 4
(slot 4)
11 Power supply unit (PSU) 4
12 Power supply unit (PSU) 3
13 Power supply unit (PSU) 2
14 Power supply unit (PSU) 1
15 Manifold
Icon Description
NOTE:
page by pressing F2 during system boot), press and hold the
System ID button for more than 15 seconds.
NA The expansion card riser enables you to connect PCI Express
expansion cards.
Enables you to remotely access iDRAC. For more information,
see the Integrated Dell Remote Access Controller User's Guide at
www.dell.com/poweredgemanuals.
The USB port is 4-pin, 2.0-compliant. This port enables you to
connect USB devices to the system.
The USB port is 9-pin and 3.0-compliant. This port enables you to
connect USB devices to the system.
NA The expansion card riser enables you to connect PCI Express
expansion cards.
N/A PSU4 is the fourth PSU of the system.
N/A PSU3 is the third PSU of the system.
PSU2 is the secondary PSU of the system.
PSU1 is the primary PSU of the system.
NA The Manifold liquid cooling allows cooling for the GPUs and
processors.
Dell PowerEdge XE9640 system configurations and features
To reset the iDRAC (if not disabled on the iDRAC setup
11