Table of Contents
Advertisement
Figure 202.
7. Push in the bracket under the cold plate/hose joint. Repeat the same for all 8 brackets.
Figure 203.
8. Rotate the metallic gate to lock position and release the plunger.
Next steps
1. Reconnect the liquid cooling tubes from all the GPU cold plates to the Manifold.
2.
Slide in the system board
3. Reconnect the liquid cooling tubes 11 and 12 from the Manifold for DLC module.
4.
Install the lower brace
5. Reconnect all the cables onto the system board. For more information, see
6.
Install the
risers.
7.
Install the storage
tray.
tray.
cover.
Cabling
diagram.
Installing and removing system components
199
Advertisement
Table of Contents
