Installing The Pdb2 For Nvidia Gpu Configurations - Dell PowerEdge XE9640 Installation And Service Manual

Installing the PDB2 for NVIDIA GPU configurations

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Steps
1. Align the PDB2 on the tray and using the Phillips 2 screwdriver, tighten the screws to secure the PDB2 into the PDB2 tray.
Figure 229. Installing the PDB2 into the PDB2 tray
2. Reconnect the VSB cables on the PDB2 connecting VSB cables (right and Left) from the system board.
3. Align the PDB2 into the storage tray and slide it toward rear of the chassis until it firmly seated. Using Phillips 2 screwdriver,
tighten the screws to secure PDB2 tray into the Storage tray.
4. Reconnect the VSB cables on the PDB2 connecting from the PDB of the bottom layer.
216 Installing and removing system components
Safety instructions.
Before working inside your system.