Table of Contents
Advertisement
Installing and removing system components
Topics:
•
Safety instructions
•
Before working inside your system
•
After working inside your system
•
Recommended tools
•
Optional front bezel
•
System cover
•
Cooling fans
•
Cable cover
•
Fan board
•
Drives
•
Drive backplane
•
Optional BOSS-N1 module
•
Versabay board (VSB)
•
Storage tray
•
Cable routing for Intel GPU Configurations
•
Cable routing for NVIDIA GPU Configurations
•
Power supply unit
•
System memory
•
Turtle shell
•
Expansion cards and expansion card risers
•
Lower brace cover
•
Processor and Direct Liquid Cooling module
•
Intrusion switch
•
System battery
•
Trusted Platform Module
•
Optional OCP card
•
System board
•
LOM card and rear I/O board
•
Control panel
•
Intel GPU module, CBB (Carrier Base board) cold plate, GPU board, GPU cold plates, Power Distribution Board (PDB)
•
NVIDIA GPU module, GPU board, GPU cold plates, PCIe Switch Board (PSB), Power Distribution Board (PDB)
•
Manifold module
Safety instructions
NOTE:
Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by
yourself.
CAUTION:
Ensure that two or more people lift the system horizontally from the box and place it on a flat
surface, rack lift, or into the rails.
WARNING:
Opening or removing the system cover while the system is powered on may expose you to a risk of
electric shock.
WARNING:
Do not operate the system without the cover for a duration exceeding five minutes. Operating the
system without the system cover can result in component damage.
Installing and removing system components
7
59
Advertisement
Table of Contents
