System Weight; Processor Specifications; Psu Specifications - Dell PowerEdge XE9640 Installation And Service Manual

Table of Contents

Advertisement

NOTE:
Zb is the nominal rear wall external surface where the system board I/O connectors reside.

System weight

Table 4. Weight for the PowerEdge XE9640 system  
System configuration
XE9640 system with Intel GPUs
XE9640 system with NVIDIA GPUs
Table 5. PowerEdge system weight handling recommendations 
Chassis weight
40 pounds - 70 pounds
70 pounds- 120 pounds
≥ 121 pounds
NOTE:
The system is heavy therefore can slide over and cause damage during installation and removal from a higher
position on the rack.

Processor specifications

Table 6. PowerEdge XE9640 processor specifications  
Supported processor
th
4
Generation Intel Xeon Scalable processors

PSU specifications

The PowerEdge XE9640 system supports up to 4 AC or DC power supply units (PSUs) with 2+0 Non redundant, full power with
2x PSUs, 2+1 - N+1 redundancy, 2+2 - N+N redundancy.
NOTE:
1. The wattage capacities of any two PSUs that are present during POST are compared. The larger of the two PSUs is
activated if the PSU wattages don't match. A PSU mismatch alert is also visible in the BIOS, iDRAC, or on the system
LCD.
2. If a second PSU is installed during runtime, its wattage capacity must match that of the first PSU in order for it to be
enabled. If not, the second PSU won't be activated and the PSU will be marked as mismatched in iDRAC.
Table 7. PSU specifications  
PSU
Class
Heat
dissipation
(maximum
) (BTU/hr)
2800 W
Titaniu
10165 BTU/
AC
m
hr
2800 W
NA
10220
HVDC
BTU/hr
NOTE:
This system is also designed to connect to the IT power systems with a phase-to-phase voltage not exceeding 240
V.
22
Technical specifications
Frequency
Voltage
(Hz)
200-240 V AC 2800 W
50/60
240 V DC
NA
Maximum weight (with all drives/SSDs)
43.2 kg (95.23 pounds)
46.3 kg (102.07 pounds)
Description
Recommend two person to lift
Recommend three person to lift
Recommend to use a server-lift
Number of processors supported
Two
High line
Low line
240 VDC
100–120 V
NA
2800 W
NA
DC Current
AC Current
(A)
(A)
NA
15.6 - 12.7 A
13.6 A
NA

Advertisement

Table of Contents
loading

This manual is also suitable for:

E100s

Table of Contents