Table of Contents
Advertisement
Figure 42. Installing the expansion card filler bracket
Next steps
Replace the side
cover.
Installing a GPU card
Prerequisites
NOTE:
Install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the side
cover.
Steps
1. Align the PCIe card holder lock to the holes on the riser 1C.
2. Insert the card holder locks on either ends of the riser 1C and slide the locks to firmly be seated into place.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
77
Advertisement
Table of Contents
