Omron MD-900 User Manual page 146

3 Installation
Power Connector
A Coded
9
Connect the M12 D coded network cable to D coded M12 network connector on the rear of the
Side Laser.
10
Route the M12 D coded network cable to the Network Switch on the rear left of the AMR. Avoid
chafing, straining, or binding the cable.
11
Connect the M12 D coded network cable to port 7 or 8 of the top Network Switch.
3-42
Network Connector
D Coded
Port 8 Port 7
AMR (Autonomous Mobile Robot) MD-series Platform User's Manual (I681)
Side Laser (Rear)
Network Switches
Network Switches