Placing The Sewing Machine Head On The Stand - Duerkopp Adler 868 Instruction Manual

5.4

Placing the sewing machine head on the stand

14
1
3
–
If the sewing machine is equipped with motor on the table plate
bottom, place the machine head 1 vertically into the table plate's
cutout.
–
If the machine is equipped with motor on the machine head,
incline the machine head 2 in order to place it into the table plate's
cutout.
–
After placing the machine head immediately fix the retaining plate
that prevents the machine head from falling out when being tilted.
–
The retaining plate 3 is part of the accessories that come with the
machine head.
2