Assembling The Machine Head Support - Duerkopp Adler 512/532 Operating Manual

Fig. 20: Completing the table top II
(1) - Control box
1. Place the control box (1) on the underside of the table top.
2. Bolt the control box (1) onto the underside of the table top using 3

8.3.4 Assembling the machine head support

Fig. 21: Assembling the machine head support
(1) - Machine head support
1. Insert the machine head support (1) into drill hole (2) on the table top.
50
2
screws (2), washers, circlips and nuts.
1
1
(2) - Screws
2
(2) - Hole
Operating manual 512/532 Version 01.0 - 03/2013
Installation Instructions