ZyXEL Communications MES3500-24S User Manual page 98

Table 25 Basic Setting > IPv6 > IPv6 Configuration > DHCPv6 Client Setup (continued)
LABEL DESCRIPTION
Options Select DNS to have the Switch obtain DNS server IPv6 addresses and/or select Domain-List
to have the Switch obtain a list of domain names from the DHCP server.
Information Refresh Specify the time interval (from 600 to 4294967295 seconds) at which the Switch exchanges
Minimum other configuration information with a DHCPv6 server again.
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the nonvolatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Clear Click Clear to reset the fields to the factory defaults.
Index This is the interface index number. Click on an index number to change the settings.
Interface This is the name of the IPv6 interface you created.
IA-NA This field displays whether the Switch obtains a non-temporary IP address from the DHCPv6
server.
Rapid-Commit This field displays whether the Switch obtains information from the DHCPv6 server by a
rapid two-message exchange.
DNS This field displays whether the Switch obtains DNS server IPv6 addresses from the DHCPv6
server.
Domain-List This field displays whether the Switch obtains a list of domain names from the DHCP server.
Information Refresh This field displays the time interval (in seconds) at which the Switch exchanges other
Minimum configuration information with a DHCPv6 server again.
Chapter 8 Basic Setting
MES3500-24S/MGS3520 Series User's Guide
98