Ipv6 - ZyXEL Communications MES3500-24S User Manual

Layer 2 management switch
Table of Contents

Advertisement

The following table describes the labels in this screen.
Table 15 Basic Setting > Interface Setup
LABEL
Interface Type
Interface ID
Add
Cancel
Index
Interface Type
Interface ID
Interface
Delete
Cancel

8.8 IPv6

Use this screen to view the IPv6 interface status and configure Switch's management IPv6 addresses.
See
Appendix C on page 405
Click Basic Setting > IPv6 in the navigation panel to display the IPv6 status screen as shown next.
Figure 34 Basic Setting > IPv6
The following table describes the labels in this screen.
Table 16 Basic Setting > IPv6 Status
LABEL
Index
Interface
Active
Chapter 8 Basic Setting
DESCRIPTION
Select the type of IPv6 interface for which you want to configure. The Switch supports the VLAN
interface type for IPv6 at the time of writing.
Specify a unique identification number (from 1 to 4094) for the interface.
Note: To have IPv6 function properly, you should configure a static VLAN with the
same ID number in the Advanced Setup > VLAN screens.
Click this to create a new entry.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
This field displays the index number of an entry.
This field displays the type of interface.
This field displays the identification number of the interface.
This field displays the interface's descriptive name which is generated automatically by the
Switch. The name is from a combination of the interface type and ID number.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
for more information about IPv6.
DESCRIPTION
This field displays the index number of an IPv6 interface. Click on an index number to view more
interface details.
This is the name of the IPv6 interface you created.
This field displays whether the IPv6 interface is activated or not.
MES3500-24S/MGS3520 Series User's Guide
88

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgs3520 seriesMgs3520-28Mgs3520-28fMgs3520-50

Table of Contents