Cluster Management Status; Cluster Member Switch Management - ZyXEL Communications MES3500-24S User Manual

45.2 Cluster Management Status

Click Management > Cluster Management in the navigation panel to display the following screen.
Note: A cluster can only have one manager.
Figure 250 Management > Cluster Management: Status
The following table describes the labels in this screen.
Table 192 Management > Cluster Management: Status
LABEL
Status
Manager
The Number of
Member
Index
MacAddr
Name
Model
Status

45.2.1 Cluster Member Switch Management

Go to the Clustering Management Status screen of the cluster manager switch and then select an Index
hyperlink from the list of members to go to that cluster member switch's web configurator home page.
Chapter 45 Cluster Management
DESCRIPTION
This field displays the role of this Switch within the cluster.
Manager
Member (you see this if you access this screen in the cluster member switch directly and not via
the cluster manager)
None (neither a manager nor a member of a cluster)
This field displays the cluster manager switch's hardware MAC address.
This field displays the number of switches that make up this cluster. The following fields describe
the cluster member switches.
You can manage cluster member switches via the cluster manager switch. Each number in the
Index column is a hyperlink leading to the cluster member switch's web configurator (see
251 on page 377).
This is the cluster member switch's hardware MAC address.
This is the cluster member switch's System Name.
This field displays the model name.
This field displays:
Online (the cluster member switch is accessible)
Error (for example the cluster member switch password was changed or the switch was set as the
manager and so left the member list, etc.)
Offline (the switch is disconnected - Offline shows approximately 1.5 minutes after the link
between cluster member and manager goes down)
MES3500-24S/MGS3520 Series User's Guide
376
Figure