Table of Contents
Advertisement
Figure 141 Advanced Application > IP Source Guard > Static Binding
The following table describes the labels in this screen.
Table 106 Advanced Application > IP Source Guard > Static Binding
LABEL
DESCRIPTION
ARP Freeze
ARP Freeze allows you to automatically create static bindings from the current ARP entries (either
dynamically learned or static ARP entries) until the Switch's binding table is full.
Note: The ARP learning mode should be set to ARP-Request in the IP Application > ARP
Setup > ARP Learning screen before you use the ARP Freeze feature.
Condition
All - Select this and click ARP Freeze to have the Switch automatically add all the current ARP
entries to the static bindings table.
Port List - Select this and enter the number of the port(s) (separated by a comma). ARP entries
learned on the specified port(s) are added to the static bindings table after you click ARP
Freeze.
VLAN List - Select this and enter the ID number of the VLAN(s) (separated by a comma). ARP
entries for the specified VLAN(s) are added to the static bindings table after you click ARP
Freeze.
Static Binding
MAC Address
Enter the source MAC address in the binding.
IP Address
Enter the IP address assigned to the MAC address in the binding.
VLAN
Enter the source VLAN ID in the binding.
Port
Specify the port(s) in the binding. If this binding has one port, select the first radio button and
enter the port number in the field to the right. If this binding applies to all ports, select Any.
Add
Click this to create the specified static binding or to update an existing one.
Chapter 27 IP Source Guard
MES3500-24S/MGS3520 Series User's Guide
240
Advertisement
Table of Contents
Troubleshooting
