Table of Contents
Advertisement
Clear the TX Tagging check box to set the Switch to remove VLAN tags before sending.
6
Click Add to save the settings to the run-time memory. Settings in the run-time memory are lost when the
7
Switch's power is turned off.
Click the VLAN Status link in the Static VLAN screen and then the VLAN Port Setting link in the VLAN Status
8
screen.
Enter 102 in the PVID field for port 2 to add a tag to incoming untagged frames received on that port so
9
that the frames are forwarded to the VLAN group that the tag defines.
10 Click Apply to save your changes back to the run-time memory.
Chapter 6 Tutorials
MES3500-24S/MGS3520 Series User's Guide
52
Advertisement
Table of Contents
Troubleshooting
