Table of Contents
Advertisement
Table 180 Management > Access Control > SNMP (continued)
LABEL
Port
Username
Apply
Cancel
42.3.5 Configuring SNMP Trap Group
Click Management > Access Control > SNMP > Trap Group to view the screen as shown. Use the Trap
Group screen to specify the types of SNMP traps that should be sent to each SNMP manager.
Figure 229 Management > Access Control > SNMP > Trap Group
The following table describes the labels in this screen.
Table 181 Management > Access Control > SNMP > Trap Group
LABEL
Trap Destination
IP
Type
Options
Chapter 42 Access Control
DESCRIPTION
Enter the port number upon which the manager listens for SNMP traps.
Enter the username to be sent to the SNMP manager along with the SNMP v3 trap.
Note: This username must match an existing account on the Switch (configured in
the Management > Access Control > SNMP > User screen).
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select one of your configured trap destination IP addresses. These are the IP addresses of the
SNMP managers. You must first configure a trap destination IP address in the SNMP Setting
screen.
Use the rest of the screen to select which traps the Switch sends to that SNMP manager.
Select the categories of SNMP traps that the Switch is to send to the SNMP manager.
Select the individual SNMP traps that the Switch is to send to the SNMP station. See
42.3.3 on page 349
for individual trap descriptions.
The traps are grouped by category. Selecting a category automatically selects all of the
category's traps. Clear the check boxes for individual traps that you do not want the Switch to
send to the SNMP station. Clearing a category's check box automatically clears all of the
category's trap check boxes (the Switch only sends traps from selected categories).
MES3500-24S/MGS3520 Series User's Guide
355
Section
Advertisement
Table of Contents
Troubleshooting
