ZyXEL Communications MES3500-24S User Manual page 380

Table 194 Management > Cluster Management > Configuration (continued)
LABEL DESCRIPTION
Cancel Click Cancel to begin configuring this screen afresh.
Clustering The following fields relate to the switches that are potential cluster members.
Candidate
List A list of suitable candidates found by auto-discovery is shown here. The switches must be directly
connected. Directly connected switches that are set to be cluster managers will not be visible in
the Clustering Candidate list. Switches that are not in the same management VLAN group will not
be visible in the Clustering Candidate list.
Password Each cluster member's password is its web configurator password. Select a member in the
Clustering Candidate list and then enter its web configurator password. If that switch administrator
changes the web configurator password afterwards, then it cannot be managed from the Cluster
Manager. Its Status is displayed as Error in the Cluster Management Status screen and a warning
icon ( ) appears in the member summary list below.
If multiple devices have the same password then hold [SHIFT] and click those switches to select
them. Then enter their common web configurator password.
Add Click Add to save your changes to the Switch's run-time memory. The Switch loses these changes if
it is turned off or loses power, so use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Refresh Click Refresh to perform auto-discovery again to list potential cluster members.
The next summary table shows the information for the clustering members configured.
Index This is the index number of a cluster member switch.
MacAddr This is the cluster member switch's hardware MAC address.
Name This is the cluster member switch's System Name.
Model This is the cluster member switch's model name.
Remove Select this checkbox and then click the Remove button to remove a cluster member switch from
the cluster.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 45 Cluster Management
MES3500-24S/MGS3520 Series User's Guide
380