Figure 48 Advanced Application > VLAN > Static VLAN
The following table describes the related labels in this screen.
Table 29 Advanced Application > VLAN > Static VLAN
LABEL
DESCRIPTION
ACTIVE
Select this check box to activate the VLAN settings.
Name
Enter a descriptive name for the VLAN group for identification purposes. This name consists of up
to 64 printable characters; spaces are allowed.
VLAN Group ID
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Port
The port number identifies the port you are configuring.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Chapter 9 VLAN
MES3500-24S/MGS3520 Series User's Guide
104