Table of Contents
Advertisement
Figure 159 Advanced Application > VLAN Mapping
The following table describes the labels in this screen.
Table 119 Advanced Application > VLAN Mapping
LABEL
DESCRIPTION
Active
Select this option to enable VLAN mapping on the Switch.
Port
This field displays the port number.
*
Use this row to make the setting the same for all ports. Use this row first and then make adjustments on a
port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Active
Select this check box to enable the VLAN mapping feature on this port. Clear this check box to disable
the VLAN mapping feature.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
29.3 Configuring VLAN Mapping
Click the VLAN Mapping Configure link in the VLAN Mapping screen to display the screen as shown. Use
this screen to enable and edit the VLAN mapping rule(s).
Chapter 29 VLAN Mapping
MES3500-24S/MGS3520 Series User's Guide
260
Advertisement
Table of Contents
Troubleshooting
